Atlas Cables Mavros XLR 1.0m

The Mavros XLR is a superb interconnect designed to complement the performance of ‘high-end’ audio systems by achieving maximum signal transfer.

Κατασκευαστής: Atlas Cables
Προσδιορισμός μεταβολής τιμής:
Salesprice with discount
Τιμή:1.480 €
Total: 1.480 €
Total without tax: 1.480 €
Discount
Total discount:
Tax amount
Total Tax:
Τιμή / kg:
Description

The Mavros XLR uses the very highest quality ‘6N’ (99.99997% purity) copper manufactured using the OCC ‘Ohno Continuous Cast’ technique. Cables manufactured with lower grade materials and poor manufacture typically have a coarse, grainy structure which compromises sound quality. In the manufacture of Mavros, we maximise the copper’s conductivity by ensuring that there is typically one grain in approximately 125 metres of conductor, allowing the signal a continuous unbroken path –in practice, the signal has a faster, cleaner and more direct path to follow.

The cable consists of a pair of conductors, each made up from six bundles of 12 multi-conductor wires, plus a thicker centre wire. This in turn is covered by a continuous copper/Mylar™ electrostatic screen with copper shielding braid, ensuring minimal susceptibility to RF interference and noise.

Theoretically, the best dielectric (insulation layer) is air. Conventional dielectric (insulation) materials impose their own signature distortion and loss on the signal. Our technique uses a microporous PTFE (Teflon™) tape, which is wound around the core conductors, then covered again and stabilised using a protective FPE (Flexible PolyEthylene) dielectric. This process maintains the required conductor geometry, and bestows greater manufacturing consistency.

Atlas use cold-weld terminations wherever possible, including our current generation ‘dark Chrome’ XLR connectors. By reducing the number of materials and break points in the signal path, our objective its to minimise discontinuity and loss in the signal path, resulting in more consistent construction and improved audio performance.

NB. Atlas XLR plugs are wired as follows by default: Pin 1 = Ground; Pin 2 = Hot, Pin 3 = Cold. If you require a different configuration, please contact us. Always check with your equipment manufacturer’s instructions before ordering.

 

Specifications

 
Construction Multi-core LF/MF, Solid core HF (1.5mm)
Material OCC
Dielectric Microporous PTFE (Teflon™)
Screen none
Capacitance 111.14 pF/m
Inductance 0.3412 µH/m
Resistance 0.0035 Ohm/m
VOP 0.77
Outside Diameter 10.22mm
 
 
 
 
 
 

 

 
 
 
 

 

 

 

 
 

 

 

 
 

 

 

 
 

 

 

 

 
 

Newsletter

Επικοινωνία

Διεύθυνση: Διδότου 17,  Αθήνα, 10680

Τηλέφωνο: 2106049340

Email: sales(at)soundgallery.gr

Επικοινωνήστε μαζί μας