Two-channel power Luxman M-10x will replace the previous flagship model M-900u. The amplifier will be included in the next generation line, which Luxman
will introduce for its 100th anniversary in 1925.
An important part of Luxman’s heritage in amplifier design is the ODNF negative feedback circuit, which the company has been developing since the end of
the last century. The circuit evolved into the Luxman Integrated Feedback Engine System (LIFES1.0) technology, which was used in the Luxman M-10x.
The M-10x has 4-channel push-pull output modules equipped with 3-stage composite Darlington transistors. The result was a 4-parallel push-pull output stage with 16 transistors per channel.
Field-effect transistors (FET) are in the preliminary stages. Particular attention was paid to power supply – selected zener diodes manufactured by Vishay (USA)
work with the new stabilizer microcircuits. The total capacitance of the filtering power supply capacitors reached 80,000 microfarads.
The circuit is assembled on boards with thickened gold-plated tracks.
The M-10x with two rows of symmetrically located cooling radiators weighs under 50 kg. It is capable of delivering from nominal 2 x 150 watts into 8 ohms to peak 2 x 1200 watts into 1 ohm. Even single-channel “stadium” 2.4 kW into 2 ohms in BTL mode is possible. At the same time, the first 12 W are worked out in the “pure” class A.
As stated, the high damping factor (710) will allow you to cope with even very complex columns. There are 12V trigger inputs and outputs to work with other components.
Rated output |
150W + 150W (8Ω) / 300W + 300W (4Ω) in stereo / 600W (8Ω) in stereo / monaural |
Instantaneous maximum output |
1,200W + 1,200W (1Ω) / Stereo 2,400W (2Ω) / Monaural |
Input sensitivity / input impedance |
1.24V / 150W (8Ω) GAIN 29dB / Unbalanced 51kΩ, Balanced 28kΩ |
Frequency characteristic |
20Hz to 20kHz ( +0, -0.1dB) 1Hz to 130kHz (+0, -3.0dB) |
Total harmonic distortion |
0.003% or less (1kHz / 8Ω) 0.04% or less (20Hz to 20kHz / 8Ω) |
S / N ratio (IHF-A) |
117dB |
Amplifier circuit |
LIFES 1.0 |
Output configuration |
3 steps Darlington 4 parallel push pull x 2 |
Power transformer |
EI type 1,250VA |
Damping factor |
600 (by EIAJ current injection method) |
Power-supply voltage |
AC100V (50 / 60Hz) |
power consumption |
530W (according to the Electrical Appliance and Material Safety Law) 280W (when there is no signal) 1.0W (when in standby) |
External dimensions |
440 (width) x 224 (height) x 488 (depth) mm Depth includes front knob 2 mm and rear terminal 38 mm |
mass |
48.4kg (main body) 54.4kg (standard packaging) |
accessories |
Dedicated trigger cable (modular / 3.5mm monaural) Power cable (JPA-17000: with polarity mark) |
Speaker terminal compatible Y lug terminal dimensions |
a Part width: 14 mm or less b Part width: 7 mm or more
* |
It may not be possible to install depending on the shape of the Y lug terminal . |
|
|