Input AC parameters ON-grid
Input voltage - factory set: 100 - 120 Vac / 230 - 240 Vac
Input frequency range - factory set: 45 to 65 Hz
Input current adjusted: 10 Aac
transfer time: < 15 ms, on grid to off grid

Output AC parameter OFF-grid
Output voltage - factory setting:  100-130Vac / 200-245Vac (pure sine wave)
Output frequency: 50 Hz / 60 Hz +/- 0.05% (crystal controlled)
Harmonic distortion: <2%
Continues power @ 25°C: 950 VA
Power 30min. @ 25°C: 1.500 VA
Peak Power 3 sec. @ 25°C: 3.700 VA
Ø battery operating time/average load 400VA (Cos φ=1): 5 hours
Maximum load: up to short circuit
Maximum asymmetric load: up to P cont.
Load detection (Stand by): 2.5 W
Cos φ: 0.1 – 1
Maximum efficiency: 93% (dc/ac conversion mode)
Consumption stand-by / on: 1.5 W / 8 W
Overload + short-circuit protection: automatic disconnecting with 3 restart attempts
Overheat protection: warning before shut-down with automatic restart
Operating temperature: 10 °C - 45°C
Relative Humidity: 0 - 85% non-condensing
Acoustic level: < 29 dB

Battery power unit
Battery type: LFP - Lithium Iron Phosphate (LiFePO4)
Nominal battery voltage: 24 Vdc
Nominal capacity: 100 Ah
Charge current - factory setting: 10 Adc
Working temperature: 0 to 45°C, 32 to 113°F
BMS - Battery Management System: active balancing

Terminal Area
AC output receptacles: 3x Hubbell duplex, Hospital spec. Grade or 3x Furutech High perfor. Schuko sockets
AC output fuse: thermal – magnetic circuit breaker
AC input connection: ICE 320 - C14 (fuse 16/10AT)
Interface: 3 service ports:
Power switch: on/off (“on” = green LED)
Safety key switch for shipping: key switch “Release/Lock” all functions

Additional Features
Finish standard: black anodized *
Weight: 80 kg / 253 Ibs
Dimension (w x h x d): 48 x 54 x 59 cm  | 19" x 23" x 23"
Remote control: optional