General Specifications of the JBL Stage A190 Floorstanding Speaker

• 2.5 way, dual 8″, 1″ aluminum tweeter floor-standing loudspeakers
• 2 x 8″ (203mm) Polycellulose Low-Frequency Woofer Yes
• New High Definition Imaging (HDI) Waveguide Yes
• 1” (25mm) Aluminum Dome Tweeter Yes
• Recommended Amplifier Power 20 – 225W
• Frequency Response 36Hz – 40kHz
• Sensitivity 91dB @ 1M, 2.83V
• Nominal Impedance 6 Ohms
• Crossover Frequencies 1.4kHz, 2.0kHz
• Enclosure Type Bass-Reflex via Rear-Firing Tuned Port
• Dimensions (W x D x H) 260 x 370 x 1070mm
• Weight 49.74 lbs (22.56kg)

General Specifications of JBL Stage A130 Bookshelf Speaker

• 2 way, 5.25″ woofer, 1″ aluminum tweeter bookshelf loudspeakers
• 5.25″ (133mm) Polycellulose Low-Frequency Woofer
• New High Definition Imaging (HDI) Waveguide
• 1” (25mm) Aluminum Dome Tweeter
• Recommended Amplifier Power 20 – 125W
• Frequency Response 55Hz – 40kHz
• Sensitivity 86dB @ 1M, 2.83V
• Nominal Impedance 6 Ohms
• Crossover Frequencies 3.2kHz
• Enclosure Type Bass-Reflex via Rear-Firing Tuned Port
• Dimensions (W x D x H) 190 x 230 x 321mm
• Weight (each) 12.02 lbs (5.45kg)

General Specifications of the JBL Stage A135C Center Channel

• 2 way, 6 x 3″ woofer, 1″ aluminum tweeter centre loudspeaker
• 6 x 3″ (76mm) Polycellulose Low-Frequency Woofer
• New High Definition Imaging (HDI) Waveguide
• 1” (25mm) Aluminum Dome Tweeter
• Recommended Amplifier Power 20 – 150W
• Frequency Response 75Hz – 40kHz
• Sensitivity 90dB @ 1M, 2.83V
• Nominal Impedance 6 Ohms
• Crossover Frequencies 2.5kHz
• Enclosure Type Bass-Reflex via Rear-Firing Tuned Port
• Dimensions (W x D x H) 745 x 166 x 104mm
• Weight 16.42 lbs (7.45kg)

General Specifications of the JBL Stage A120P Subwoofer

• 12″ 500 Watts powered subwoofer
• 12″ (305mm) Polycellulose Low-Frequency Woofer
• Power 250W RMS (500W Dynamic)
• Frequency Response 32Hz – 150Hz
• Crossover Frequencies 50Hz – 150Hz (variable) 24dB/octave
• Controls Auto Power, Crossover, Level, Phase
• Input 1 x Line-Level LFE Input
• Enclosure Type Bass-Reflex via Rear-Firing Tuned Ports
• Power Requirement 120V, 60Hz (US) 220-230V, 50/60Hz (EU)
• Power Consumption (Idle/Full/Power) <0.5W (standby) / 335W/2A (max – 230V) / 335W/4A (max – 120V)
• Dimensions (W x D x H) 370 x 420 x 395mm
• Weight 41.09 lbs (18.64kg)