LC-3 MK3+ is a high quality power cable, designed to power Hi-End audio and video systems. The power cord was designed using

experience gained while designing the reference power cable LS-1. The LC-3 MK3+ is also available as optional equipment for

GigaWatt power strips and power conditioners.

In the improved construction of the cable we used a new conductor with high conductance and a new isolator.

Lossless flow of energy is made possible by the strands of the cable made up from eight solid core conductors with

1,5 mm² cross-section each.

Those are made from 99,997% pure copper (OFHC C10100), additionally subdued to an annealing process,

which allows them to gain uniform structure and better conductance.

The isolation of the conductors is made from elastic polyethylene with lowered dielectric constant.

The LC-3 MK3+ has three times the cross-section of the working wires compared to the LC-1 MK3+. The external sheath

is made from soft PVC, which allows for increased flexibility of the cable. Another protection is given by the plastic braid,

wear resistant, and equipped with an anti-static mesh, which prevents the occurrence of static loads. The very high

cross-section of the cable guarantees negligible resistance and almost unlimited current flow. On the other hand,

its comparably high intrinsic capacitance, which is caused by the cable geometry and the characteristics of the dielectric,

stands in for great filtering and damping capabilities for a wide range of interference. The wires of the cable are protected

by a static shield, made from laminated aluminum foil with an internal, copper flow wire. The tight construction of the shield

covers 100% of the surface of the cable, perfectly protecting against all kinds of external interference. In addition the shield

prevents the appearance and spread of internal interferences as well as returns parasitic currents to the ground wire.

In the construction of the cable a lot of attention was devoted to the reduction of the vibration created by the electromagnetic

field induced around the conductors. All parallel twisted wires and the shield are covered with elastic material damping the

unwanted vibration.

Available cable types: EU (Schuko), US (Nema 5-20R), AU (AS/NZS 3112)
Line voltage: 220-240 V / 50-60 Hz
Maximum load (continuous): 16 A
Gross weight: 1,20 kg
Lengths: 1.0 m, 1.5 m, 2.0 m or more